Never put off needed roofing in Overland Park, as the longer you ignore signs of damage and missing shingles or tiles, the more extensive and costly those eventual repairs! Roof cracks and leaks also risk interior wood rot and mold, and those cracks let out your home’s heating and cooling increasing utility costs.
If you’re like many homeowners, you might be very diligent about needed home repairs but don’t always know what signs to look for when it comes to roof damage. To help you keep your home in tiptop shape, note these 7 signs that it’s time for roofing in Overland Park, and call a roof repair contractor at the first indication of roof damage on your property.
A sudden gust of wind can pull off a few shingles and this doesn’t necessarily mean your home needs extensive roof repair. A roofer can often replace those shingles for very little cost to you, and your roof will be in excellent condition once again.
However, large “bald spots” along the home’s roof or a few dozen missing shingles typically indicate that it’s time for repairs or reroofing. Aged shingles tend to get brittle so that they fall away from their connectors; once a few shingles begin to decay like this, more are likely to follow! Timely repairs keep roof damage to a minimum and protect the home from water leaks through those bare spots.
Roof shingles should lie flat against each other and the roof structure underneath them. If you notice what appears to be buckling, curving, waves, or other unevenness, it’s probably time for new roofing! Old shingles curl up and create waving and buckling, no longer protecting the roof below, and they then need replacing.
A home’s roof is a major part of its overall insulation, so holes in the roof, worn shingles, and other damage often result in cold drafts during wintertime or a stuffy feeling during warm summer months. You might also notice a spike in your utility bills or your home’s HVAC appliances cycling on more often than usual.
As with all building materials, shingles and tiles wear out with age and will need eventual replacing no matter their quality or how much you paid for a new roof installation. Shingles might last some 20 years while clay tiles typically need replacing after 30 years or more.
Note, too, that roofs on structures in areas with very harsh weather conditions often wear out sooner rather than later. The more rain, direct sunlight, and high winds beating down on those roofing materials, the sooner they’ll need replacing. If you’re not sure of the roof’s age or condition, schedule a full inspection so a roofing contractor can check for potential damage.
Damaged plumbing pipes and resultant leaks can mean water stains on ceiling tiles, but a leaking roof also lets water drip into the home, resulting in water stains, wood rot, and mold. If you’ve ruled out all other causes of this water damage, have the roof checked for needed repairs or even roof replacement.
A sagging roof can indicate structural damage and the risk of the roof caving in. Not only does this mean expensive repairs but it can also be dangerous to anyone in the vicinity! If you stand on the sidewalk or across the street and notice what appears to be sagging areas along your home’s roof, schedule a roof inspection as quickly as possible.
As shingles age or suffer storm damage, their protective granules usually end up in the home’s gutters or around the lawn near the house. Shingles pulling away from the roof structure will also mean loose nails and these will also end up in the gutters, along the lawn, and elsewhere.
Don’t overlook these granules, nails, and other parts of the roof that you might find scattered around your property, and they indicate old and worn shingles or shingles ready to fall away from the roof. Replacing worn shingles ensures the roof is always in good condition and avoids future damage to the roof structure and even your home itself!
Overland Park Roofing is happy to bring this information to our readers and we hope it helped educate you about when it’s time for roofing in Overland Park. If you live in the area and see any of these roof damage indicators, call our trusted Overland Park, KS, roofing contractors. We can schedule a convenient roof inspection and offer a FREE quote for all the roofing you need to have done. For more information, give us a call today.
Having young kids doesn’t mean you need to stay home and miss out on any fun, as there are lots of things to do with a toddler in Shawnee, KS, even as early as this weekend! For those who need something indoors and out of the city’s unpredictable weather, or who want to get out and get some fresh air with the family, you’re never without options in this quaint city. Whether you live in the area or are planning a visit, check out this short list of fun things to do with a toddler in Shawnee, KS.
If you need something to do indoors, but aren’t quite ready to settle down and spend quiet time with your child, check out Monkey Bizness! This indoor playground is geared for younger children in particular, and provides a wide range of slides, bouncing stations, climbing walls, and much more.
All attractions at Monkey Bizness are family-friendly, with room for protective parents and their children to play together. You can even book a private party for your child and his or her friends! To find out more including COVID-19 restrictions and business hours, check out their website at http://monkeybizness.com/.
When it’s time to cool off with your little one, visit the Leawood Aquatic Center. This family-friendly community pool has lots of room for young kids, as well as water slides and fitness areas. The pool is staffed by lifeguards and provides covered areas for relaxing. To find out about admission prices and everything else you need to know, visit https://www.leawood.org/parks-and-recreation/aquatic-center/.
There’s no better way to get back to nature with your family than by visiting Windsor Park. This park is surrounded by a picturesque creek and covered with lots of trees, while also providing two tennis courts, a playground, lots of picnic tables, and plenty of space for walking, jogging, and just relaxing. The park is free to enter but you can also rent a pavilion for private parties. To find out more, visit the city’s website at https://www.pvkansas.com/Home/Components/FacilityDirectory/FacilityDirectory/38/641.
It’s never too early to take your family to a children’s museum, and the Wonderscope Children’s Museum offers lots of attractions for everyone! The museum specializes in hands-on, interactive exhibits designed to get children involved and to offer a unique experience they might not get anywhere else.
Exhibits include Crossroads of Past and Future, where children can hop on a stagecoach and riverboat, the Wonder Climber floor-to-ceiling climbing wall, and the Kansas City Café, where kids can cook up some famous KC barbecue. To double-check business hours and find out more about what the museum offers, visit https://www.wonderscope.org/.
Pioneer Crossing Park offers over 2 acres of green space, perfect for a leisurely weekend stroll. The park also offers two bronze statues that kids usually love to see and even touch! The park also offers a small playground perfect for toddlers and young kids, making it an excellent spot for the entire family. Visit http://www.kansastravel.org/lenexa/pioneercrossingpark.htm to find out more.
Overland Park Roofing is happy to make this information available to our readers and we hope it helps you find some fun things to do with a toddler in Shawnee, KS. At Overland Park Roofing, we know that families and especially those with active toddlers have far better things to do on the weekend than worry about roof repairs, but we also know how vital it is that you keep your family warm and dry with a solid roof overhead! If you know your home needs roof repairs or a new roof installation, call us for your no-hassle, no-obligation inspection. We carry a variety of durable, affordable materials for roofing in Shawnee, KS and stand behind all our work with a full guarantee you can trust.
What is roofing felt? When homeowners think of needed roof inspections and repairs, they’re typically considering the condition of asphalt shingles or tiles; however, the felt or paper under those materials is a vital roof component! This paper should always be in good condition and replaced as needed.
Roof felt or tar paper starts with a base from natural or synthetic materials such as wood cellulose, fiberglass, or polyester; this base is then saturated with a protective coating, typically liquid asphalt. This protective coating repels water, keeping it out of the home’s interior and away from its framing.
Since roofing felt is such an important roof component, homeowners should know the basics of how it’s maintained and when it needs replacing. This information will protect your home from water damage and ensure the roof is in good repair!
Before you go another month or, worse yet, a full year without needed roof repairs, check out this handy guide to roof felt including why it’s needed, when it needs replacing, and how to replace it properly, as well as some mistakes to avoid when it comes to roof felt installation and repairs. You can then discuss your home’s roof with a contractor near you as needed, and ensure it’s always in good condition and looking its best.
Roofing felt is an added layer of protection between the roof’s lower layers, including your home’s interior trusses, and outside elements. As roof felt repels water, it also reduces the risk of standing water on the roof, protecting shingles and tiles from water damage.
To better understand the purpose of the roof felt, first note the basics of roof construction. A home’s roof is built in layers:
Roofing felt’s waterproof coating helps direct rainwater off the roof and away from shingles and tiles. That coating also stops roof decking and other materials from absorbing rain, snow, melting ice, and excess humidity. This waterproof coating protects roof layers, as said, and keeps that moisture from seeping into the home’s interior.
Since a roof’s rigid foam insulation helps stop moisture from damaging a roof’s lower layers, some roofers might consider roofing felt as unnecessary. In turn, homeowners might wonder if they can forego roof felt and avoid that added expense during roof installation.
While roof felt might add to the cost of a new roof or roof repairs, this paper is far cheaper than fixing a water-damaged roof or cracked interior ceilings! Roof leaks also increase the risk of dangerous, costly mold growth inside the home.
Roof felt’s added barrier also helps protect your home in case of missing shingles. After a strong storm, or if shingles have broken away due to age and everyday wear and tear, it might be some time before a roofer can arrive to perform repairs. Tar paper or roof felt helps protect roof layers and your home’s interior in the meantime.
Roof decking, trusses, and other materials also absorb humidity, not just rain! Consider the benefits of adding roof felt in tropical or coastal areas or any location with high humidity levels. Melting snow and ice also increases the risk of roof water damage; if you live in the Midwest or anywhere with heavy winter snows, ensure your home is protected with a layer of high-quality roof felt.
In most cases, the roof felt will last between 12 and 20 years. Roofing felt’s lifespan depends on its initial quality, as reputable name-brand manufacturers often use more durable materials than cheap, off-brand suppliers. Heavy clay or slate tiles also put more pressure on tar paper, risking tears and premature damage.
No matter tar paper’s expected lifespan, remember that decaying roof felt increases the risk of roof leaks and water damage. Rather than waiting until your home’s roof felt is degraded completely, invest in new tar paper at the first sign of decay. New roof felt will keep the roof and home’s interior protected from water damage and in good repair.
If you’re not sure about the condition of your home’s roof felt, have a roofing contractor perform a complete inspection every year or two, and especially after strong storms or inclement winters. He or she will typically pull up a few shingles and inspect that roof paper before replacing those tiles, so they know if the tar paper itself needs replacing.
Note that a felt roof is different than roofing felt. A felt roof consists of three roofing layers; a vapor control barrier, a felt layer, and a cap sheet. These layers are then welded or torched together, creating a strong roofing system.
Felt roofs are often preferred for flat roofs, as the waterproof barrier built into a felt roof helps repel water away from those surfaces. A felt roof itself might last some 10 to 20 years, depending on the quality of materials and installation and overall weather conditions.
In most cases, the old roof felt doesn’t need to be removed before you apply new tar paper. If the roof decking under it is damaged and needs repairs or replacing, however, a roofer typically removes those layers and applies new decking, and then new roof insulation and felt over it.
If the roof decking is in good repair and the existing roof felt flat, you can often add new felt onto that old felt. Roofers will often apply a bitumen primer to fill in any gaps and crevices, much like applying primer to a wall before painting! Bitumen primer also ensures the surface is as level and flat as possible, and ready for new felt.
In some cases, existing roof felt might have large gaps, tears, or other such damage so that it provides a poor base for new felt. Old, outdated felt might also be thin and poor-quality, and peeling away from the roof decking or insulation. Removing that felt, even if it’s flat, is then a better option than putting new felt over it.
Note, too, that a roofer might quote your repair job as “removal down to decking” or similar wording. As roof felt goes over the roof decking, a roofer should then remove the felt and insulation if this work is included on your quote! It’s extra work for him or her to scrape away that felt but if it’s included in your quote, it should be included in their repairs.
Bitumen adhesives designed for roof felt are the best choice for roof felt; these adhesives ensure a secure fit. However, bitumen adhesives usually require the use of a blowtorch, something a homeowner should not try on their own!
Self-adhesive roof felt is a much better choice for homeowners tackling DIY roof repairs. Ensure you invest in a high-quality tar paper brand, so the adhesive is firm and lasts as long as possible. Avoid using glues and other adhesives not designed for roof felt, as these might lose adhesion or get brittle and then crack and fall away during hot summer months.
While roof felt cannot be repaired, you can patch the felt surface if there are only a few missing sections or small areas of damage. To remove damaged pieces of roof felt, score the area with a specialty roof knife or cutter meant for roofing materials.
Once scored, you can then cut through the felt and pull away from the damaged section. Use a scraper to pull up the stuck adhesive and other such pieces.
Ensure you don’t cut into the roof decking or chip and splinter any roofing layers while you work. Also, don’t just toss away damaged pieces of felt but use them as a template for cutting new sections; cut out a piece just larger than what you need, as you’ll want your patches to overlap the existing felt.
As you attach the new patch to the roof, work from the middle outward, and press its adhesive into place. Once you reach the edges, take an extra minute to push them onto the roof decking or adjoining felt, to ensure a secure fit. You can then cover the patched area with a liquid roof sealant product, to ensure the patch stays in place and keep it protected from leaks and water damage.
Roof felt, coated in or saturated with a bitumen coating, provides an excellent waterproof barrier against outside water and humidity. If you need an effective alternative, however, such as for a shed, consider a synthetic roof underlayment.
The term underlayment refers to the layer underneath shingles or tiles; a synthetic underlayment made of a polymer or material other than felt also provides an effective moisture barrier and is easy to cut and fabricate. Many also have a self-stick backing, so you don’t need to worry about bitumen or other such adhesives.
The downside to synthetic materials is that they do not self-seal around nails and other fasteners, so you invest in some liquid roof sealant to apply in these areas. Also, note that using certain synthetic materials might void the warranty on your roof’s shingles or tiles! Be sure to check any paperwork you have from your roofer or shingle manufacturer before deciding on a synthetic underlayment for your home’s roof.
It’s never recommended that a homeowner get on their home’s roof, as even experienced roofers and other contractors can fall and suffer serious injuries; how much more dangerous is a sloped or slick roof for a homeowner not accustomed to walking on its surface! Dropping tools and other equipment is also dangerous to anyone on the ground below.
In turn, it’s best to manage as many DIY repairs from the safety of your home’s interior as possible. If your home has an attic loft or crawlspace with exposed felt, you might notice holes or rotted and damaged material in certain sections, and these can typically be repaired from the underside area inside your home.
Ideally, roof repairs and new roof installation would be scheduled for a mild, sunny day. However, even with the best weather reports available, you can’t always foresee showers and storms the day of your scheduled roof work!
While you might not want to put off those repairs, it’s never okay to shingle over wet roofing felt. If you do, that trapped moisture will have nowhere to go once it begins to evaporate. In turn, your shingles or tiles might suffer from water damage, or the paper itself might crumble and fall away.
Since you want to avoid installing shingles or tiles over wet felt so moisture doesn’t get trapped between those layers, does this mean that roof felt can rot over time? First understand that there are different types of roof felt, and higher-quality brands offer more protection against water damage and the potential for rot.
Low-cost bitumen roof underlayment is probably the most common roof felt type, and the one most likely to suffer wear including rot when exposed to sunlight around gutters and seams. Lightweight alternatives such as high and low water vapor resistance underlayment allow vapor to pass through, protecting them from rotting.
Whether or not a roofer will work in the rain depends on how hard it’s raining and the work at hand. A roofer might replace shingles during a light drizzle, as he or she will typically work fast enough to protect roof felt and decking from absorbing water.
However, along with protecting decking and other roofing layers and materials from water damage, a roofer also needs to be concerned with their own safety! A wet roof is typically slick and dangerous even for the most experienced roofer, and certainly, a homeowner should never attempt DIY repairs in the rain.
A roofer might also need to cover exposed roof areas with a tarp or other material during rainy weather, as he or she can only work so fast! Whatever the case, remember that having your roof repairs or replacement delayed a few days is often worth the inconvenience if it means protecting roof decking and felt from water damage and resultant rot and decay.
To keep the roof felt in good condition, it’s vital that you remove leaves and other materials regularly. Leaves, twigs, branches, and other such debris hold moisture against a roof, which can seep under tiles and shingles and damage those roofing layers.
Since added weight might tear roof felt, avoid walking on a roof as much as possible, as your footsteps tug and pull at roof tiles and shingles and increase the risk of roof felt tearing. Trim back any branches hanging over the structure so they don’t scrape the roof in high winds and inclement weather.
One last but very vital tip is to schedule a professional roof inspection every year or two years at the most, and especially after a particularly stormy season or if a strong storm has moved through your area. Regular inspections find roof damage quickly, allowing a roofer to repair roofing felt as needed and ensure your structure’s roof is always in good condition.
No matter what aspect of roofing our customers want to hear about, our roofing company is there for you with high-quality resources. Our roofing contractors put together this article at Overland Park Roofing in order to spread the word about roofing felt and answer common questions our clients have about it. If you ever require roof repair or roof installation services in the Kansas area, we’re the roofing team for you!
Needing emergency roof repair in Overland Park can be overwhelming for homeowners, as gaping holes in a roof mean interior water leaks and resultant damage including mold growth. If your home’s roof collapsed or otherwise suffered damage during a storm, that rainwater might still be coming down and seeping into your home!
No matter your needs for emergency roof repair in Overland Park, it’s vital that you call a roofing contractor right away. However, while you’re waiting for them to arrive or if you’re calling during a busy season and need to wait a day or so before they can put you on their schedule, note some suggestions for how to protect your roof. It’s also helpful to note a few things to avoid as well, so don’t make that damage worse!
When you need Overland Park emergency roof repair, your first step is to protect your home from additional damage, at least as much as possible. Use an oversized, outdoor tarp to cover any areas of obvious damage and especially large holes in the roof. Secure the tarp with roofing nails and cover the nails with roof cement, to prevent water from seeping in through the nail holes.
If your home is already experiencing indoor water leaks, use a large pot or pan over a towel to catch that water and keep it from reaching the floor. Avoid sitting under that leaking area as the ceiling tiles might be softened and ready to collapse!
If the rains have stopped and you’re still waiting for an Overland Park roofing contractor to arrive, you might also tend to some damaged shingles for even more protection. Heat up curled shingles with a heat gun or hair dryer so they soften and uncurl, and then nail them back into place. Slide loose shingles underneath the shingles above them and nail them down, and then seal up gaps and nails with roofing cement.
While you can cover up some gaps and other damage while waiting for an Overland Park roofing repair contractor, there are a few common mistakes to avoid as well. One vital consideration is your safety; never get onto a wet and slick roof, even if you’re wearing work boots! Experienced roofing contractors in Overland Park often avoid wet roofs due to safety concerns, and a homeowner would do well to do the same.
It’s also important to avoid walking on damaged roof sections, as it might very well collapse right underneath you. Homeowners might also overlook signs of weakened roof sections, increasing their risk of a fall and serious injury.
Another reason to stay indoors during a rainstorm is the risk of lightning strikes. Lightning is attracted to high points and that includes someone standing on a roof! Being hit by lightning while on a metal roof is also downright dangerous, as metal conducts electricity very easily. Wait until the storms have passed before doing anything outside and especially on a ladder or the roof, to ensure your safety.
When waiting for a 24-hour roof repair contractor in Overland Park, you want to avoid making that damage to your home’s roof even worse! One important suggestion for homeowners is to call an Overland Park roofing contractor as soon as they know they need roof repairs, even if it’s in the middle of the night. A roofing company might not always answer the phone but many will make appointments for initial inspections in the order calls are received, so it’s vital that you get your place in line by calling right away.
If you do decide to nail some shingles or other materials onto a roof, ensure you use roofing nails! Remember that underneath shingles and tiles is an underlayment material and then plywood decking. Using overly large nails, staples, screws, and other connectors not meant for roofs might result in severe damage to those materials and added Overland Park roof repair costs.
A homeowner might also avoid pulling damaged shingles and flashing off a home’s roof, perhaps thinking that they’re protecting underlying materials or might save on repair costs by removing those items themselves. This can also result in further damage to the underlayment and other roofing layers, and rarely saves any significant Overland Park roof repair costs. Instead, simply cover those damaged areas as best you can and wait for your contractor!
Emergency roof repair in Overland Park typically starts with a full-scale inspection; that inspection might indicate that it’s time for a new roof altogether rather than repairs! While your Overland Park roofing contractor is the best source of advice for choosing between repairs and a new roof, you might note some added considerations to keep in mind as well.
One important factor is the roof’s age. Is your home’s roof nearing the end of its expected lifespan? If so, a full roof replacement might be a good long-term investment, rather than paying for Overland Park roof repairs now and then a new roof in just a few years. On the other hand, if the roof is only a few years old and should have several more years of life left, repairs might be all that’s needed to keep it in good condition for another decade or so.
It’s also good to consider the reason for needing emergency roof repair in Overland Park. While a storm might cause roof damage, ask your roofing contractor if poor-quality shingles or a poor roofing installation job might have contributed to that damage! If so, investing in reroofing with name-brand, durable shingles, installed by a reliable roofing contractor in Overland Park, can mean a roof you can rely on for many years to come.
A homeowner would also do well to remember that their budget is an important consideration but sometimes “patching up” a roof repeatedly means more costs over the years than investing in a new roof installation. Eventually roof materials will wear out no matter the quality of your roof repair in Overland Park so you’ll need that new roof anyway, so consider a full-scale reroofing when needed for your home.
Homeowners never want to put off needed residential roof repair, as ignoring damage allows holes and cracks to get worse over time. A damaged roof also lets out your home’s heated and cooled air throughout the year while letting in outside heat and cold, increasing your utility costs.
Signs of a damaged roof include:
The sooner a homeowners addresses needed roof repairs, the less costly that work and the less likely that damage spreads or allows water to seep into the home’s interior spaces. To ensure you’re keeping your entire home in good repair and know when to call for a residential roof inspection, note some added details about these signs of roof damage.
It’s also helpful to review indications that your home might need a full-scale roof replacement rather than repairs, as well as various residential roofing materials on the market today. You can then discuss your options with a roof repair contractor near you and know that your home’s roof is always strong and stable and looking its best!
A roof doesn’t need to outright collapse to be in need of serious repairs! Timely repairs keep damage from spreading, as said, and help to contain repair costs. Note some additional details about common yet often overlooked signs of needed roof repairs so you know when to call a contractor and schedule an inspection.
When your home needs roof repair, how do you decide on investing in those fixes versus a full-scale roof replacement? Your roofing contractor is an excellent source of advice as he or she can note the overall condition of that roof, including damage to its decking and other major structural materials. If a home’s roof needs new decking or has suffered severe water damage, replacing some shingles is often insufficient!
A homeowner might also consider the roof’s age when deciding between repairs and full-scale reroofing. Investing in hundreds of dollars of new shingles now for an older roof that will need replacing in a few years anyway might not be the best long-term investment! A new roof also won’t need repairs for several years, so you can choose a full-scale reroofing and typically not need to worry about roof repair costs for seven to ten years, if not longer.
A homeowner might also note if they will be facing roof repair costs repeatedly over the next few years. Worn shingles in one area of a roof might indicate excessive wear and tear so that you’ll need to replace shingles along other roofing sections soon enough. Rather than facing those repeated costs and risking interior water damage in the meantime, consider a full-scale roof replacement instead.
Since a new roof means less risk of interior water leaks and resultant damage and mold, consider a full-scale reroofing for, as an example, aging parents. As your parents get older, you don’t want them to be concerned over a damaged roof or be affected by a drafty interior, water damaged ceilings, mold, and the like. A new roof ensures their home is in good condition and stays that way for many years to come!
A home’s roof also affects its overall value. An old and worn-out roof might reduce your home’s value, even after needed repairs, while investing in a new roof can mean increasing that value. If you might put your home on the market in a few years, consider a new roof now, so that it’s still in good condition when it’s time to sell. This also ensures you avoid interior water damage and other issues that might decrease your home’s value and overall salability.
If your home’s roof does need repairs or replacement, you have more options for roofing materials than you might realize! Standard asphalt shingles are durable and affordable, making them a favorite choice for homeowners, but they also tend to have a short lifespan, often lasting no more than 7 to 20 years before they need replacing.
Metal roofing is quickly becoming a favorite option for homeowners, as metal is tough and durable as well as lightweight, so you can often install it over an existing roof. Metal also provides a watertight seal over a home’s roof, making it an excellent choice for tropical areas or those prone to storms and rainy weather.
To add style to your home, consider clay tiles. Clay tiles have a Mediterranean feeling to them, offering a natural look and feel that many homeowners prefer over asphalt and other manmade materials. Slate tiles are also very attractive and durable but heavier than many other choices, so they may not be usable for older homes with weakened frames and local building codes might not permit their installation over an existing roof.
How much should roof repair cost?
Only a roofing contractor near you can note your expected roof repair costs; those costs will depend on the type of damage your home’s roof has suffered, number of missing shingles, and if you’ll need interior water damage repair as well as roof repair. Most homeowners might expect to pay anywhere from $700 to $2000 for roof repairs.
Can you perform DIY roof repairs?
A roofing contractor ensures their safety when on a roof and also knows local building codes covering roof repairs and replacement. He or she also knows how to inspect hidden areas and all roofing materials properly, such as eaves and nooks, flashing, underlayment, decking, and the like. To ensure high-quality roof repairs that last, avoid DIY work and invest in a qualified roofing contractor instead.